stainless steel ball

Products description:
forged steel gate valve For gate valves which sizes are 2"(DN50) and smaller, forged steel valves are introduced. Compared with castings, forged valve bodies offer the advantages of more uniform structure, greater density, higher strength integrity, enhanced dimensional characteristics and closer dimensional tolerances. The design of forged steel gate valves are also var...
Click for detail

Products description:
forged globe valve...
Click for detail

Products description:
forged steel globe valve...
Click for detail

Products description:
forged steel check valve...
Click for detail

Products description:
flanged valve...
Click for detail

Products description:
pressure seal gate valve For gate valve with pressure Class 600 or higher, Pressure seal bonnet is suggested for better closure, while bolted bonnet is still available for customer's option.The pressure seal design incorporates a metal-to-metal seal that becomes tighter as the pressure increases. The initial preload deforms the taper on the soft iron gasket to mate with the ta...
Click for detail

Products description:
pressure seal globe valve...
Click for detail

Products description:
Y globe valve...
Click for detail

Products description:
Y check valve...
Click for detail

Products description:
forged steel strainer...
Click for detail

Products description:
cryogenic gate valve...
Click for detail

Products description:
extended body gate valve...
Click for detail

Products description:
forged steel globe valve...
Click for detail

Products description:
cryogenic ball valve...
Click for detail

Products description:
forged steel check valve...
Click for detail

Products description:
floating ball valve Floating ball valve A floating ball valve is a valve with its ball floating (not fixed by a trunnion) inside the valve body, it drifts toward to the downstream side and tightly pushes against the seat under the medium pressure to ensure sealing reliability. The floating ball valve has simple structure, good sealing performance but the seat material is requ...
Click for detail

Products description:
trunnion mounted ball valve Trunnion mounted ball valve Trunnion mounted ball valves are designed for upstream sealing. The load generated by the line fluid on ball is absorbed by the trunnion bearings and is directly transmitted to the valve body, and the upstream seat driven by medium pressure drifts towards the ball to creater reliable sealing. The seat design has a built-...
Click for detail

Products description:
top entry ball valve Top-entry ball valve When selecting ball valves, utilization of a top entry design, will permit easy access to internal components for service and parts replacement, without having to remove the ball valve from the line. The ability to make quick repairs is especially important at start-up time when valve damage from fabrication debris is most likely to c...
Click for detail

Products description:
metal seated ball valve Metal-seated ball valve Metal-seated ball valves are introduced when the temperature and pressure rating of fluids override the limit of traditional PTFE-seated  ball valves. Metal-seated ball valves combine the advantage of both gate valves and PTFE-seated ball valves, and are recommanded in some extreme conditions. The Manufacturing and mainte...
Click for detail